Repairs to uPVC Windows
upvc window repairs is a great choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.
It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs and increase energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause significant damage to your home, and could even be fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good condition.
For single pane windows it is relatively easy to replace them, and the new window will usually fit inside the frame that was previously installed easily. If you have
double glazed window repairs-paned windows that are held together by internal beading, it is difficult to remove and replace the old panes. In this situation, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.
If you plan attempt to remove the window panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass to ensure that any fragments of glass fall on the fabric instead of landing on the floor, where they could be trampled on and cause further damage.
It's a great idea tape the gap once the glass is removed. This will prevent drafts and water from entering your property until a professional arrives to fix the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap is particularly large, you might want to consider using the security door with an integrated window, as it will provide the best of both worlds.
2. Sagging
Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a number of problems that include sagging. A sagging window in uPVC could cause issues with light, draughts and even security. It's important to take action as soon as you discover that your
upvc window repairs windows are falling down.
Repositioning the hinges could aid in fixing a window which is sliding. To do this, you'll need to open the window so that you can access the frame. After that, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and verify the an appropriate fit. If you are happy with the fit of your window, tighten the screws to keep them in place.
If you aren't able to move the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and become dry which causes them to loosen. It is important to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.
uPVC handles may also loosen. Most often, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window and do a test fitting. The corner joints of the sash need to align with the casing joint. If it isn't, you can use a screwdriver to loosen the handle, and then return the mechanism to its original its original position.
3. Water Leaks
If you awake to damp floors and mouldy walls each time it rains it's important to take action. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or is missing.
This is an easy fix that can be done by any DIYer who has the ability. Based on the severity of the problem the old caulking may need to be removed before a new layer can be applied. It is important to remember that when it comes to
uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and could reduce the efficiency of your energy.
It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more extreme instances, you may need to replace the window.
Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.
It is also important to keep in mind that if the leak originates from the glass of your
double glazed window repairs near me-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. Again this can easily be corrected by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or loose and open with a breeze It could be the hinges that are at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.
Most households in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. It's easy to change the hinges on a window however it is easier if someone else helps you to hold the frame.
It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. You can do this by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.
The problem with the hinges on windows could be the result of incorrectly opening the window a certain manner or because of poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are always happy to offer assistance.
Regular lubrication of the hinges is also necessary. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to operate and close more smoothly. It also decreases the chance of windows sticking and prevent corrosion. It is recommended to do this at least once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.
5. Draughts
Draughts in Upvc windows can be caused by a few different things. The hinges may also become unbalanced due to wear, creating gaps between the frame and sash. If they are beyond repair, it might be required to realign them. The second is the interlock, which is on the hinge side of the window, may be misaligned. Again, it's feasible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.
The next most common reason for draughts are the window seals, these are susceptible to being worn out or damaged over time, and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping will help to prevent draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce the possibility of draughts.
The last way to reduce the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. They will help block out cold air and keep your home warm and cozy!
Your upvc windows can keep providing excellent insulation and security in your home with a little regular maintenance and repairs.